|
Filter Media |
|
| Types of Filter Media: | |
|
Resin Impregnated Cellulose Micron Rating available: 03, 10, 25 micron (Betax=2) |
 |
|
Microglass Micron Rating available: 01, 03, 06, 10, 25, 40 micron (Betax=200) |
 |
|
Stainless Steel Wire Mesh Micron Rating available: 10, 25, 60, 125, 200, 250 micron (No Beta Rating) |
 |
| Gaskets/Oring Seal materials: Buna-N for Mineral Oils (HH, HL, HM, HV) (default), Viton for Synthetic Oils (optional) | |
| End Cap material: typically Zinc Plated Carbon Steel, Stainless Steel (optional) | |
| Support Core material: typically Zinc Plated Carbon Steel, Stainless Steel (optional) | |
| Pressure drop charts available, in accordance to ISO 3968 | |
| Suction Strainers are located in the inlet of the pump. The strainer removes contamination from the reservoir fluid before it reaches the pump and the system components. These filters should be set up with an internal bypass valve to prevent starving the pump. Note: These are usually threaded. | |
| Pressure Filters are located downstream of the pump. It is exposed to full system pressure. The filter removes contamination generated or passed by the pump. An exceptionally contamination sensitive component may be protected by a "point of use filter" located immediately upstream of it. | |
| Return Line Filters are located downstream of the pump and system components and upstream of the system reservoir. The return filter removes contamination generated or ingested by the pump and components before the fluid returns to the reservoir. | |
| Spin On Filters / Assemblies are used for both for suction and return lines. | |
| Also available: carbon steel wire mesh, water absorbent media. | |
| Types of Filter Tests | |
| Product questions? Please call: +1-866-624-7351 | |